Terex recall: 2019–2026 C4000 and 3 more – equipment
Ring Power Corporation is recalling 2019–2026 Terex C4000, 2019–2026 Terex C5000, 2019–2026 Terex C6000 and 1 more models because of an injury risk – 73 vehicles (potentially affected). The recall report reached NHTSA on August 17, 2026. Distributed nationwide.
Lower risk A safety recall: the manufacturer or NHTSA found a vehicle defect that poses a risk to safety, or a failure to meet a federal safety standard. The remedy is free.
Share
| Product | 2019–2026 Terex C4000, 2019–2026 Terex C5000, 2019–2026 Terex C6000 and 1 more models |
| Brand | Terex |
| Company | Ring Power Corporation |
| Type | Vehicles |
| Classification | Vehicle |
| Report received | August 17, 2026 |
| Published by NHTSA | August 17, 2026 |
| Quantity | 73 vehicles (potentially affected) |
| Recall ID | 26V534000 |
Vehicles in this recall
| Make | Model | Model years |
|---|---|---|
| Terex | C4000 | 2019–2026 |
| Terex | C5000 | 2019–2026 |
| Terex | C6000 | 2019–2026 |
| Terex | General 65 | 2019–2026 |
Identifiers and details
- NHTSA campaign number
- 26V534000
- Manufacturer recall number
- UTC0001
- Component
- EQUIPMENT
- Recalled part
- Plate Weldment · Pole Position Guide Arm Assembly Pin · 450543
- Initiated by
- NHTSA Office of Defects Investigation
Why it was recalled
The problem: an injury risk.
NHTSA's defect summary: “Ring Power Corporation (Ring Power) is recalling certain 2019-2026 Terex C4000, C5000, C6000, and General 65 digger derrick trucks. An insufficient weld on the plate weldment may crack, causing the retaining pin to separate.”
The consequence, according to NHTSA: “Without a retaining pin, the pole guide arm may fall, increasing the risk of injury to people around the truck.”
What to do
NHTSA: “Ring Power will inspect and replace the weldment plate as necessary, free of charge. Owner notification letters are expected to be mailed September 2026. Owners may contact Ring Power's customer service at 1-904-737-7730. Ring Power's number for this recall is UTC0001.”
Enter your 17-character vehicle identification number (VIN) at nhtsa.gov/recalls or on the manufacturer's site to see whether your vehicle is included. Safety recall repairs are free at an authorized dealer, even if the vehicle is used or out of warranty.
Official notice: NHTSA recall 26V534000.
Other Terex recalls
| Date | Recall | Problem | Agency |
|---|---|---|---|
| Oct 2, 2026 |  Terex recall: 2020–2022 C4000 and 2 more – trailer hitchesVehicles · 100 vehicles (potentially affected) | a crash risk Lower risk | NHTSA Vehicle |
Other vehicle recalls
| Date | Recall | Problem | Agency |
|---|---|---|---|
| Oct 9, 2026 | Lippert recall: Seating Power Cord – electrical systemVehicles · 4,435 units (potentially affected) | a fire risk Lower risk | NHTSA Equipment |
| Oct 9, 2026 | Grand Design recall: 2026–2027 Imagine – equipmentVehicles · 148 vehicles (potentially affected) | a crash risk Lower risk | NHTSA Vehicle |
| Oct 8, 2026 | Genesis recall: 2017–2020 G80 and 1 more – seatsVehicles · 94,622 vehicles (potentially affected) | a fire risk Most serious | NHTSA Vehicle |
| Oct 8, 2026 | Honda recall: 2023–2026 Accord Hybrid and 2 more – tiresVehicles · 4,804 vehicles (potentially affected) | an injury risk Lower risk | NHTSA Vehicle |
| Oct 8, 2026 | Tiffin recall: 2022–2025 Allegro Bus and 1 more – fuel systemVehicles · 177 vehicles (potentially affected) | a fire risk Lower risk | NHTSA Vehicle |
| Oct 7, 2026 | Toyota recall: 2026 RAV4 Plug-in Hybrid – engine and engine coolingVehicles · 30,978 vehicles (potentially affected) | a crash risk Serious | NHTSA Vehicle |
About this recall
Is Terex 2019–2026 Terex C4000, 2019–2026 Terex C5000, 2019–2026 Terex C6000 recalled?
Yes. Ring Power Corporation reported the recall to NHTSA on August 17, 2026; NHTSA published it August 17, 2026 (Vehicle). Only the vehicles listed on this page are included.
Why was it recalled?
Because of an injury risk. Ring Power Corporation (Ring Power) is recalling certain 2019-2026 Terex C4000, C5000, C6000, and General 65 digger derrick trucks. An insufficient weld on the plate weldment may crack, causing the retaining pin to separate.
What should I do if I have it?
NHTSA says: Ring Power will inspect and replace the weldment plate as necessary, free of charge. Owner notification letters are expected to be mailed September 2026. Owners may contact Ring Power's customer service at 1-904-737-7730. Ring Power's number for this recall is UTC0001.
Where was it sold?
Nationwide.
More recalls
Source: recall records published by the U.S. Food and Drug Administration (openFDA Enforcement Reports), the USDA Food Safety and Inspection Service, the Consumer Product Safety Commission and the National Highway Traffic Safety Administration, collected twice a day. Product names, lot codes, dates and model numbers are shown exactly as the agency lists them; the agency's notice is the authority. 77.today is not affiliated with any of these agencies.